Arch Environmental Equipment Inc

An upgraded version of our Saber® Primary cleaner, the SCM features a reinforced frame and a channel-mount design for faster blade replacement from either side of the conveyor.

18″ to 120″ Conveyor Belts, Safe for Mechanical Splices, Non-Segmented Blade, Channel-Mount Frame

Utilizing the same cantilever design as the GSS cleaner, the RGS Secondary cleaner takes it a step further. A tungsten carbide blade encased in urethane makes easy work of any residual material missed by a primary cleaner.

18″ to 72″ Conveyor Belts, Tungsten Carbide Blade, Splice Tolerant, Heavy Duty Applications

The Arch Saber Roller puts a new spin on the conventional “beater roll” used in the industry for years.  Using the proven Saber blade profile, this secondary cleaner will scrape the belt clean while providing the same vibratory action needed to remove excess material from the belt.

Perfect for belts that are cleated, textured, reversible, and/or in general poor condition.

Utilizing a cam action, the Cam-A-Lot Clamp System makes quick work of changing skirtboard rubber.  360 degree rotating clamp heads allow for a custom fit in an otherwise unusable space.  Simple and easy weld on installation makes the Cam-A-Lot a hassle free solution to load zone sealing.

Manufactured in 5 foot sections, Will work with most existing seals (recommended to be paired with Arch Talon Seal).

The Talon Seal uses a unique design with multiple barriers to contain dust and fines to the belt. This seal leverages the weight of the load to either increase or decrease the seal-to-belt pressure; heavy loads create more pressure, lighter loads less pressure.

Use With Existing Clamps, Continuous Lengths up to 200’, Minimal Friction

Flexiskirt sealing systems utilize directionally grooved rubber to force fines back into the bulk flow. Recommended for very dry, dusty materials, this design takes advantage of the rubber’s natural flexibility to seal the belt by conforming to the belt surface. Able to withstand temperatures of up to 150°F, Flexiskirt seal conforms to the belt’s dynamics with minimal friction as it adapts to widening or narrowing gaps between the belt and seal chute wall.

18″ to 120″ Conveyor Belts, Safe for Mechanical Splices

Load zones create problem areas, especially those that are unsupported.  Arch’s Simplicity Slider System fills in problematic gaps in the load zone.  Slider Bar inserts allow the use of existing idler stands or can be replaced with new stands. 

100% Customizable, Steel Construction, Bolt-in-Place installation Supports Length and Width of load zone

Constructed of polyurethane, Wyatt Alignment Disks will not damage your belts, and since they mount to your existing carry or return idler rolls, they are easy to install.

Corrosion Resistant, For Lightweight Belts, 100% Polyurethane, Easily Mounts to Current Idlers

Featuring double-layer wear-resistant polyurethane, Simplicity Chute Baffles trap and contain dust particles. The overlapping design provides double the protection against harmful fugitive dust. 

Stop Escaping Dust, Customizable to Your Dimensions.

The Archweigh Dual SC offers a weight accuracy of 1 1% – 2% as it self-adjusts to the movement of the belt, thanks to Arch’s patented dual-ended load cells.  This unique engineering compensates for outside forces on the belt by forcing converse reactions by the load cells; one is forced up while the other pushes down.  (Constant recalibration is never necessary)

No assembly required, Bolt-in-Place Installation, Minimum Recalibration

The Archweigh Integrator utilizes a unique Analog-to-Digital conversion process which allows for the use of an industry standard programmable logic controller (PLC) as a control processor. The exclusive converter internally performs thousands of weight and speed calculations per minute and transmits that high accuracy value to the PLC. The processor then uses those numbers to perform basic rate, weight, and totalizer calculations.

Single-Scale Integrator-Touchscreen Display-Unlimited Communication Options

The CTS 9000 IRD is equipped with a push-button that starts a wash cycle without stopping the conveyor. The wash cycle will allow the operator five minutes to clear the lens and the unit will return online automatically. The total unit consists of 3 IP 66 enclosures mounted on a metal bracket facing each other with the sensing beams, an electronic control unit which is mounted on the bracket facing out, and a special metal tray to catch the falling material.

Auto-Wash Mechanism, For Belts 24” to 96”, Minimum Recalibration, High-Impact Housing

Arch’s CTS 700 BL utilizes a mechanical delay to prevent trips from incidental misalignment.  The switch features two upright arms connected to a rotary switch that will shut down a conveyor before damage is done.

(Once activated, the switch must be manually reset)

For Belts 24” to 96”, Bolt-in-Place Installation, Detects Misalignment in Both Directions

The CTS 600 BCD blocked chute detector is a tilt-type switch, which is mounted inside the chute to monitor any blockage in the material conveyed. Should material start to build up due to a blockage, it will lift the sensing rod, tilting the switch; any tilt to the switch above 15 degrees will cause one of the steel-encapsulated switches to open.  This unit provides a relay interface between a tilt-type probe and the conveyor control system.

Polyurethane Construction, Encapsulated Probe, Adjustable Timer, Corrosion Resistant

The CTS 100 uses an electrical rotary switch, allowing personnel to trip it manually.  The electrical switch is a self-wiping rotary switch (not a micro-switch), and consists of two normally open and two normally closed contacts.  Once the switch has been tripped, the Orange colored flag is in the “Up” position to alert maintenance personnel.  It must then be manually reset in order to restart the conveyor.

Non-Hazardous Environments Only, Self-Wiping Rotary Switch, Lockable Switch

The CTS 300 PSW is a self-wiping rotary switch (not a micro-switch), and consists of two normally open and two normally closed contacts. Once the switch has been tripped, the Blue colored flag is in the “Up” position.  The CTS 300 PSW also emits an “Audible” alarm sound before “Start Up” of the conveyor to warn maintenance personnel that the conveyor is about to start.

(This switch should only be used in conjunction with an Arch “CMS Conveyor Monitoring System” and not as a stand-alone switch.  Once tripped it must be manually reset to restart the conveyor)

Hazardous/Non-Hazardous Environments, Audio/Visual Pre-Start Alarms, Trip Indication LEDs, Lockable Switch